WTware 6.0.36 supervisor.
[        KERNEL] [    0.000000] Linux version 4.19.175 (aka@c23) (gcc version 8.3.0 (Debian 8.3.0-6)) #3 SMP Thu Feb 11 11:15:36 EST 2021
[        KERNEL] [    0.000000] x86/fpu: x87 FPU will use FXSAVE
[        KERNEL] [    0.000000] BIOS-provided physical RAM map:
[        KERNEL] [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[        KERNEL] [    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[        KERNEL] [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[        KERNEL] [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003eedffff] usable
[        KERNEL] [    0.000000] BIOS-e820: [mem 0x000000003eee0000-0x000000003eee2fff] ACPI NVS
[        KERNEL] [    0.000000] BIOS-e820: [mem 0x000000003eee3000-0x000000003eeeffff] ACPI data
[        KERNEL] [    0.000000] BIOS-e820: [mem 0x000000003eef0000-0x000000003eefffff] reserved
[        KERNEL] [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[        KERNEL] [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[        KERNEL] [    0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[        KERNEL] [    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[        KERNEL] [    0.000000] SMBIOS 2.3 present.
[        KERNEL] [    0.000000] DMI:  /CN700-8237, BIOS 6.00 PG 08/08/2008
[        KERNEL] [    0.000000] tsc: Fast TSC calibration using PIT
[        KERNEL] [    0.000000] tsc: Detected 1496.356 MHz processor
[        KERNEL] [    0.005676] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[        KERNEL] [    0.005682] e820: remove [mem 0x000a0000-0x000fffff] usable
[        KERNEL] [    0.005699] last_pfn = 0x3eee0 max_arch_pfn = 0x100000
[        KERNEL] [    0.005710] MTRR default type: uncachable
[        KERNEL] [    0.005712] MTRR fixed ranges enabled:
[        KERNEL] [    0.005716]   00000-9FFFF write-back
[        KERNEL] [    0.005719]   A0000-BFFFF uncachable
[        KERNEL] [    0.005722]   C0000-CEFFF write-protect
[        KERNEL] [    0.005725]   CF000-EFFFF uncachable
[        KERNEL] [    0.005727]   F0000-F7FFF write-through
[        KERNEL] [    0.005730]   F8000-F8FFF uncachable
[        KERNEL] [    0.005732]   F9000-FFFFF write-through
[        KERNEL] [    0.005734] MTRR variable ranges enabled:
[        KERNEL] [    0.005738]   0 base 000000000 mask FC0000000 write-back
[        KERNEL] [    0.005741]   1 base 03F000000 mask FFF000000 uncachable
[        KERNEL] [    0.005745]   2 base 0E8000000 mask FF8000000 write-combining
[        KERNEL] [    0.005749]   3 base 03EF00000 mask FFFF00000 uncachable
[        KERNEL] [    0.005750]   4 disabled
[        KERNEL] [    0.005752]   5 disabled
[        KERNEL] [    0.005753]   6 disabled
[        KERNEL] [    0.005755]   7 disabled
[        KERNEL] [    0.006369] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[        KERNEL] [    0.012008] found SMP MP-table at [mem 0x000f3730-0x000f373f]
[        KERNEL] [    0.012059] initial memory mapped: [mem 0x00000000-0x01bfffff]
[        KERNEL] [    0.012235] ACPI: Early table checksum verification disabled
[        KERNEL] [    0.016346] ACPI: RSDP 0x00000000000F7A10 000014 (v00 CN700 )
[        KERNEL] [    0.016358] ACPI: RSDT 0x000000003EEE3000 00002C (v01 CN700  AWRDACPI 42302E31 AWRD 00000000)
[        KERNEL] [    0.016378] ACPI: FACP 0x000000003EEE3080 000074 (v01 CN700  AWRDACPI 42302E31 AWRD 00000000)
[        KERNEL] [    0.016399] ACPI: DSDT 0x000000003EEE3100 0056E7 (v01 CN700  AWRDACPI 00001000 MSFT 03000000)
[        KERNEL] [    0.016413] ACPI: FACS 0x000000003EEE0000 000040
[        KERNEL] [    0.016425] ACPI: APIC 0x000000003EEE8800 00005A (v01 CN700  AWRDACPI 42302E31 AWRD 00000000)
[        KERNEL] [    0.016455] ACPI: Local APIC address 0xfee00000
[        KERNEL] [    0.016467] 122MB HIGHMEM available.
[        KERNEL] [    0.016471] 883MB LOWMEM available.
[        KERNEL] [    0.016473]   mapped low ram: 0 - 373fe000
[        KERNEL] [    0.016475]   low ram: 0 - 373fe000
[        KERNEL] [    0.016484] Zone ranges:
[        KERNEL] [    0.016486]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[        KERNEL] [    0.016490]   Normal   [mem 0x0000000001000000-0x00000000373fdfff]
[        KERNEL] [    0.016493]   HighMem  [mem 0x00000000373fe000-0x000000003eedffff]
[        KERNEL] [    0.016497] Movable zone start for each node
[        KERNEL] [    0.016499] Early memory node ranges
[        KERNEL] [    0.016502]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[        KERNEL] [    0.016505]   node   0: [mem 0x0000000000100000-0x000000003eedffff]
[        KERNEL] [    0.016510] Initmem setup node 0 [mem 0x0000000000001000-0x000000003eedffff]
[        KERNEL] [    0.016515] On node 0 totalpages: 257662
[        KERNEL] [    0.030680]   DMA zone: 32 pages used for memmap
[        KERNEL] [    0.030683]   DMA zone: 0 pages reserved
[        KERNEL] [    0.030686]   DMA zone: 3998 pages, LIFO batch:0
[        KERNEL] [    0.030925]   Normal zone: 1736 pages used for memmap
[        KERNEL] [    0.030929]   Normal zone: 222206 pages, LIFO batch:63
[        KERNEL] [    0.044230]   HighMem zone: 31458 pages, LIFO batch:7
[        KERNEL] [    0.046151] Using APIC driver default
[        KERNEL] [    0.046282] ACPI: PM-Timer IO Port: 0x408
[        KERNEL] [    0.046288] ACPI: Local APIC address 0xfee00000
[        KERNEL] [    0.046310] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[        KERNEL] [    0.046351] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[        KERNEL] [    0.046359] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[        KERNEL] [    0.046365] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[        KERNEL] [    0.046370] ACPI: IRQ0 used by override.
[        KERNEL] [    0.046373] ACPI: IRQ9 used by override.
[        KERNEL] [    0.046381] Using ACPI (MADT) for SMP configuration information
[        KERNEL] [    0.046388] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[        KERNEL] [    0.046433] [mem 0x3ef00000-0xfebfffff] available for PCI devices
[        KERNEL] [    0.046436] Booting paravirtualized kernel on bare hardware
[        KERNEL] [    0.046447] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[        KERNEL] [    0.046472] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:1 nr_node_ids:1
[        KERNEL] [    0.046931] percpu: Embedded 27 pages/cpu s78988 r0 d31604 u110592
[        KERNEL] [    0.046949] pcpu-alloc: s78988 r0 d31604 u110592 alloc=27*4096
[        KERNEL] [    0.046952] pcpu-alloc: [0] 0 
[        KERNEL] [    0.046997] Built 1 zonelists, mobility grouping on.  Total pages: 255894
[        KERNEL] [    0.047003] Kernel command line: wtboot=hdd5 quiet BOOT_IMAGE=packages/kernel 
[        KERNEL] [    0.047978] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[        KERNEL] [    0.048443] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[        KERNEL] [    0.048469] Initializing CPU#0
[        KERNEL] [    0.048483] Initializing HighMem for node 0 (000373fe:0003eee0)
[        KERNEL] [    0.067083] Initializing Movable for node 0 (00000000:00000000)
[        KERNEL] [    0.086585] Memory: 1011788K/1030648K available (4351K kernel code, 220K rwdata, 1324K rodata, 3512K init, 296K bss, 18860K reserved, 0K cma-reserved, 125832K highmem)
[        KERNEL] [    0.086603] virtual kernel memory layout:
[        KERNEL] [    0.086603]     fixmap  : 0xfff65000 - 0xfffff000   ( 616 kB)
[        KERNEL] [    0.086603]   cpu_entry : 0xffc00000 - 0xffc9d000   ( 628 kB)
[        KERNEL] [    0.086603]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[        KERNEL] [    0.086603]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[        KERNEL] [    0.086603]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[        KERNEL] [    0.086603]       .init : 0xc15d0000 - 0xc193e000   (3512 kB)
[        KERNEL] [    0.086603]       .data : 0xc143fe2d - 0xc15c5300   (1557 kB)
[        KERNEL] [    0.086603]       .text : 0xc1000000 - 0xc143fe2d   (4351 kB)
[        KERNEL] [    0.086606] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[        KERNEL] [    0.086784] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[        KERNEL] [    0.086898] rcu: Hierarchical RCU implementation.
[        KERNEL] [    0.086902] rcu: 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[        KERNEL] [    0.086905] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[        KERNEL] [    0.086931] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16
[        KERNEL] [    0.087427] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[        KERNEL] [    0.088648] Console: colour VGA+ 80x25
[        KERNEL] [    0.088669] console [tty0] enabled
[        KERNEL] [    0.088682] ACPI: Core revision 20180810
[        KERNEL] [    0.088974] APIC: Switch to symmetric I/O mode setup
[        KERNEL] [    0.088977] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[        KERNEL] [    0.090486] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[        KERNEL] [    0.108932] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1591b0555ae, max_idle_ns: 440795224411 ns
[        KERNEL] [    0.108973] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.71 BogoMIPS (lpj=5985424)
[        KERNEL] [    0.108981] pid_max: default: 32768 minimum: 301
[        KERNEL] [    0.109077] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[        KERNEL] [    0.109091] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[        KERNEL] [    0.109488] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[        KERNEL] [    0.109492] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[        KERNEL] [    0.109497] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[        KERNEL] [    0.109502] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available!
[        KERNEL] [    0.109505] Speculative Store Bypass: Vulnerable
[        KERNEL] [    0.109507] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[        KERNEL] [    0.109575] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[        KERNEL] [    0.121333] Freeing SMP alternatives memory: 20K
[        KERNEL] [    0.232945] smpboot: CPU0: Centaur VIA C7 Processor 1500MHz (family: 0x6, model: 0xd, stepping: 0x0)
[        KERNEL] [    0.233260] Performance Events: no PMU driver, software events only.
[        KERNEL] [    0.233422] rcu: Hierarchical SRCU implementation.
[        KERNEL] [    0.233784] smp: Bringing up secondary CPUs ...
[        KERNEL] [    0.233788] smp: Brought up 1 node, 1 CPU
[        KERNEL] [    0.233791] smpboot: Max logical packages: 1
[        KERNEL] [    0.233796] smpboot: Total of 1 processors activated (2992.71 BogoMIPS)
[        KERNEL] [    0.234798] devtmpfs: initialized
[        KERNEL] [    0.235241] random: get_random_u32 called from bucket_table_alloc.isra.8+0x7d/0x160 with crng_init=0
[        KERNEL] [    0.235410] PM: Registering ACPI NVS region [mem 0x3eee0000-0x3eee2fff] (12288 bytes)
[        KERNEL] [    0.235525] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[        KERNEL] [    0.235536] futex hash table entries: 256 (order: 2, 16384 bytes)
[        KERNEL] [    0.235592] pinctrl core: initialized pinctrl subsystem
[        KERNEL] [    0.235873] NET: Registered protocol family 16
[        KERNEL] [    0.236429] cpuidle: using governor ladder
[        KERNEL] [    0.236433] cpuidle: using governor menu
[        KERNEL] [    0.236499] ACPI: bus type PCI registered
[        KERNEL] [    0.256892] PCI: PCI BIOS revision 2.10 entry at 0xf9fd0, last bus=1
[        KERNEL] [    0.256894] PCI: Using configuration type 1 for base access
[        KERNEL] [    0.274915] ACPI: Added _OSI(Module Device)
[        KERNEL] [    0.274920] ACPI: Added _OSI(Processor Device)
[        KERNEL] [    0.274923] ACPI: Added _OSI(3.0 _SCP Extensions)
[        KERNEL] [    0.274926] ACPI: Added _OSI(Processor Aggregator Device)
[        KERNEL] [    0.274929] ACPI: Added _OSI(Linux-Dell-Video)
[        KERNEL] [    0.274933] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[        KERNEL] [    0.284255] ACPI: 1 ACPI AML tables successfully acquired and loaded
[        KERNEL] [    0.289663] ACPI: Interpreter enabled
[        KERNEL] [    0.289710] ACPI: (supports S0 S1 S5)
[        KERNEL] [    0.289715] ACPI: Using IOAPIC for interrupt routing
[        KERNEL] [    0.289904] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[        KERNEL] [    0.290421] ACPI: Enabled 6 GPEs in block 00 to 0F
[        KERNEL] [    0.315100] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[        KERNEL] [    0.315118] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[        KERNEL] [    0.315133] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[        KERNEL] [    0.315144] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[        KERNEL] [    0.315701] PCI host bridge to bus 0000:00
[        KERNEL] [    0.315713] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[        KERNEL] [    0.315718] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[        KERNEL] [    0.315723] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[        KERNEL] [    0.315728] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[        KERNEL] [    0.315733] pci_bus 0000:00: root bus resource [mem 0x3ef00000-0xfebfffff window]
[        KERNEL] [    0.315740] pci_bus 0000:00: root bus resource [bus 00-ff]
[        KERNEL] [    0.315772] pci 0000:00:00.0: [1106:0314] type 00 class 0x060000
[        KERNEL] [    0.315798] pci 0000:00:00.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[        KERNEL] [    0.316288] pci 0000:00:00.1: [1106:1314] type 00 class 0x060000
[        KERNEL] [    0.316664] pci 0000:00:00.2: [1106:2314] type 00 class 0x060000
[        KERNEL] [    0.317133] pci 0000:00:00.3: [1106:3208] type 00 class 0x060000
[        KERNEL] [    0.317465] pci 0000:00:00.4: [1106:4314] type 00 class 0x060000
[        KERNEL] [    0.317759] pci 0000:00:00.7: [1106:7314] type 00 class 0x060000
[        KERNEL] [    0.318044] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
[        KERNEL] [    0.318118] pci 0000:00:01.0: supports D1
[        KERNEL] [    0.318495] pci 0000:00:08.0: [10ec:8139] type 00 class 0x020000
[        KERNEL] [    0.318528] pci 0000:00:08.0: reg 0x10: [io  0xf200-0xf2ff]
[        KERNEL] [    0.318544] pci 0000:00:08.0: reg 0x14: [mem 0xfdfff000-0xfdfff0ff]
[        KERNEL] [    0.318633] pci 0000:00:08.0: supports D1 D2
[        KERNEL] [    0.318638] pci 0000:00:08.0: PME# supported from D1 D2 D3hot D3cold
[        KERNEL] [    0.318951] pci 0000:00:0f.0: [1106:3149] type 00 class 0x01018f
[        KERNEL] [    0.318979] pci 0000:00:0f.0: reg 0x10: [io  0xff00-0xff07]
[        KERNEL] [    0.318993] pci 0000:00:0f.0: reg 0x14: [io  0xfe00-0xfe03]
[        KERNEL] [    0.319007] pci 0000:00:0f.0: reg 0x18: [io  0xfd00-0xfd07]
[        KERNEL] [    0.319020] pci 0000:00:0f.0: reg 0x1c: [io  0xfc00-0xfc03]
[        KERNEL] [    0.319034] pci 0000:00:0f.0: reg 0x20: [io  0xfb00-0xfb0f]
[        KERNEL] [    0.319048] pci 0000:00:0f.0: reg 0x24: [io  0xf400-0xf4ff]
[        KERNEL] [    0.319505] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[        KERNEL] [    0.319572] pci 0000:00:0f.1: reg 0x20: [io  0xfa00-0xfa0f]
[        KERNEL] [    0.319599] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[        KERNEL] [    0.319603] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[        KERNEL] [    0.319608] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[        KERNEL] [    0.319612] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[        KERNEL] [    0.320039] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[        KERNEL] [    0.320102] pci 0000:00:10.0: reg 0x20: [io  0xf900-0xf91f]
[        KERNEL] [    0.320165] pci 0000:00:10.0: supports D1 D2
[        KERNEL] [    0.320170] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[        KERNEL] [    0.320530] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[        KERNEL] [    0.320593] pci 0000:00:10.1: reg 0x20: [io  0xf800-0xf81f]
[        KERNEL] [    0.320658] pci 0000:00:10.1: supports D1 D2
[        KERNEL] [    0.320662] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[        KERNEL] [    0.321053] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[        KERNEL] [    0.321115] pci 0000:00:10.2: reg 0x20: [io  0xf700-0xf71f]
[        KERNEL] [    0.321180] pci 0000:00:10.2: supports D1 D2
[        KERNEL] [    0.321185] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[        KERNEL] [    0.321561] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[        KERNEL] [    0.321625] pci 0000:00:10.3: reg 0x20: [io  0xf600-0xf61f]
[        KERNEL] [    0.321690] pci 0000:00:10.3: supports D1 D2
[        KERNEL] [    0.321695] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[        KERNEL] [    0.322064] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[        KERNEL] [    0.322095] pci 0000:00:10.4: reg 0x10: [mem 0xfdffe000-0xfdffe0ff]
[        KERNEL] [    0.322192] pci 0000:00:10.4: supports D1 D2
[        KERNEL] [    0.322197] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[        KERNEL] [    0.322562] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
[        KERNEL] [    0.322657] HPET not enabled in BIOS. You might try hpet=force boot option
[        KERNEL] [    0.323052] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[        KERNEL] [    0.323083] pci 0000:00:11.5: reg 0x10: [io  0xf000-0xf0ff]
[        KERNEL] [    0.323185] pci 0000:00:11.5: supports D1 D2
[        KERNEL] [    0.323530] pci_bus 0000:01: extended config space not accessible
[        KERNEL] [    0.323687] pci 0000:01:00.0: [1106:3344] type 00 class 0x030000
[        KERNEL] [    0.323712] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf7ffffff pref]
[        KERNEL] [    0.323724] pci 0000:01:00.0: reg 0x14: [mem 0xfb000000-0xfbffffff]
[        KERNEL] [    0.323763] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[        KERNEL] [    0.323815] pci 0000:01:00.0: supports D1 D2
[        KERNEL] [    0.324037] pci 0000:00:01.0: PCI bridge to [bus 01]
[        KERNEL] [    0.324045] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[        KERNEL] [    0.324052] pci 0000:00:01.0:   bridge window [mem 0xfb000000-0xfcffffff]
[        KERNEL] [    0.324059] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf7ffffff pref]
[        KERNEL] [    0.324076] pci_bus 0000:00: on NUMA node 0
[        KERNEL] [    0.325783] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *6 7 10 11 12)
[        KERNEL] [    0.326018] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[        KERNEL] [    0.326253] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[        KERNEL] [    0.326449] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[        KERNEL] [    0.326626] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[        KERNEL] [    0.326794] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[        KERNEL] [    0.326961] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[        KERNEL] [    0.327127] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[        KERNEL] [    0.327427] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[        KERNEL] [    0.327696] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[        KERNEL] [    0.327908] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[        KERNEL] [    0.328182] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
[        KERNEL] [    0.330945] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[        KERNEL] [    0.330953] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[        KERNEL] [    0.330957] pci 0000:01:00.0: vgaarb: bridge control possible
[        KERNEL] [    0.330961] vgaarb: loaded
[        KERNEL] [    0.331179] ACPI: bus type USB registered
[        KERNEL] [    0.331334] usbcore: registered new interface driver usbfs
[        KERNEL] [    0.331403] usbcore: registered new interface driver hub
[        KERNEL] [    0.331441] usbcore: registered new device driver usb
[        KERNEL] [    0.331784] pps_core: LinuxPPS API ver. 1 registered
[        KERNEL] [    0.331787] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[        KERNEL] [    0.331839] PTP clock support registered
[        KERNEL] [    0.332106] PCI: Using ACPI for IRQ routing
[        KERNEL] [    0.332118] PCI: pci_cache_line_size set to 64 bytes
[        KERNEL] [    0.332202] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[        KERNEL] [    0.332207] e820: reserve RAM buffer [mem 0x3eee0000-0x3fffffff]
[        KERNEL] [    0.334267] clocksource: Switched to clocksource tsc-early
[        KERNEL] [    0.334506] pnp: PnP ACPI init
[        KERNEL] [    0.335194] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[        KERNEL] [    0.335202] system 00:00: [mem 0x3eee0000-0x3eefffff] could not be reserved
[        KERNEL] [    0.335209] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[        KERNEL] [    0.335214] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[        KERNEL] [    0.335220] system 00:00: [mem 0x00100000-0x3eedffff] could not be reserved
[        KERNEL] [    0.335226] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[        KERNEL] [    0.335232] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[        KERNEL] [    0.335237] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
[        KERNEL] [    0.335296] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[        KERNEL] [    0.335550] system 00:01: [io  0x0400-0x047f] has been reserved
[        KERNEL] [    0.335556] system 00:01: [io  0x0500-0x050f] has been reserved
[        KERNEL] [    0.335615] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[        KERNEL] [    0.337292] system 00:02: [io  0x0b78-0x0b7b] has been reserved
[        KERNEL] [    0.337300] system 00:02: [io  0x0f78-0x0f7b] has been reserved
[        KERNEL] [    0.337306] system 00:02: [io  0x0a78-0x0a7b] has been reserved
[        KERNEL] [    0.337311] system 00:02: [io  0x0e78-0x0e7b] has been reserved
[        KERNEL] [    0.337316] system 00:02: [io  0x0bbc-0x0bbf] has been reserved
[        KERNEL] [    0.337322] system 00:02: [io  0x0fbc-0x0fbf] has been reserved
[        KERNEL] [    0.337327] system 00:02: [io  0x04d0-0x04d1] has been reserved
[        KERNEL] [    0.337333] system 00:02: [io  0x0294-0x0297] has been reserved
[        KERNEL] [    0.337401] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[        KERNEL] [    0.337566] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[        KERNEL] [    0.338414] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[        KERNEL] [    0.339109] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[        KERNEL] [    0.340055] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[        KERNEL] [    0.340855] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[        KERNEL] [    0.341180] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[        KERNEL] [    0.341646] ACPI: IRQ 10 override to edge, high
[        KERNEL] [    0.341835] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[        KERNEL] [    0.342197] ACPI: IRQ 5 override to edge, high
[        KERNEL] [    0.342468] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[        KERNEL] [    0.342500] pnp: PnP ACPI: found 11 devices
[        KERNEL] [    0.388288] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[        KERNEL] [    0.388732] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc00ffff pref]
[        KERNEL] [    0.388740] pci 0000:00:01.0: PCI bridge to [bus 01]
[        KERNEL] [    0.388749] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[        KERNEL] [    0.388758] pci 0000:00:01.0:   bridge window [mem 0xfb000000-0xfcffffff]
[        KERNEL] [    0.388766] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf7ffffff pref]
[        KERNEL] [    0.388778] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[        KERNEL] [    0.388783] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[        KERNEL] [    0.388788] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[        KERNEL] [    0.388793] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[        KERNEL] [    0.388799] pci_bus 0000:00: resource 8 [mem 0x3ef00000-0xfebfffff window]
[        KERNEL] [    0.388804] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[        KERNEL] [    0.388809] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[        KERNEL] [    0.388814] pci_bus 0000:01: resource 2 [mem 0xf4000000-0xf7ffffff pref]
[        KERNEL] [    0.389066] NET: Registered protocol family 2
[        KERNEL] [    0.389430] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[        KERNEL] [    0.389446] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[        KERNEL] [    0.389517] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[        KERNEL] [    0.389630] TCP: Hash tables configured (established 8192 bind 8192)
[        KERNEL] [    0.389768] UDP hash table entries: 512 (order: 2, 16384 bytes)
[        KERNEL] [    0.389798] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[        KERNEL] [    0.389951] NET: Registered protocol family 1
[        KERNEL] [    0.390025] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[        KERNEL] [    0.390606] PCI Interrupt Link [ALKB] enabled at IRQ 21
[        KERNEL] [    0.392683] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[        KERNEL] [    0.392717] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[        KERNEL] [    0.392723] PCI: CLS 64 bytes, default 64
[        KERNEL] [    1.836546] Initialise system trusted keyrings
[        KERNEL] [    1.845051] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[        KERNEL] [    1.909083] Key type asymmetric registered
[        KERNEL] [    1.909088] Asymmetric key parser 'x509' registered
[        KERNEL] [    1.909138] bounce: pool size: 64 pages
[        KERNEL] [    1.909198] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[        KERNEL] [    1.909203] io scheduler noop registered
[        KERNEL] [    1.909207] io scheduler deadline registered (default)
[        KERNEL] [    1.910104] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[        KERNEL] [    1.910140] ACPI: Power Button [PWRB]
[        KERNEL] [    1.910284] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[        KERNEL] [    1.910633] ACPI: Sleep Button [SLPB]
[        KERNEL] [    1.910981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[        KERNEL] [    1.911020] ACPI: Power Button [PWRF]
[        KERNEL] [    1.925893] thermal LNXTHERM:00: registered as thermal_zone0
[        KERNEL] [    1.925899] ACPI: Thermal Zone [THRM] (23 C)
[        KERNEL] [    1.927293] zram: Added device: zram0
[        KERNEL] [    1.951262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[        KERNEL] [    1.951268] ehci-pci: EHCI PCI platform driver
[        KERNEL] [    1.951803] ehci-pci 0000:00:10.4: EHCI Host Controller
[        KERNEL] [    1.951824] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
[        KERNEL] [    1.951937] ehci-pci 0000:00:10.4: irq 21, io mem 0xfdffe000
[        KERNEL] [    1.965276] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[        KERNEL] [    1.965412] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[        KERNEL] [    1.965418] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[        KERNEL] [    1.965422] usb usb1: Product: EHCI Host Controller
[        KERNEL] [    1.965427] usb usb1: Manufacturer: Linux 4.19.175 ehci_hcd
[        KERNEL] [    1.965431] usb usb1: SerialNumber: 0000:00:10.4
[        KERNEL] [    1.965933] hub 1-0:1.0: USB hub found
[        KERNEL] [    1.965951] hub 1-0:1.0: 8 ports detected
[        KERNEL] [    1.966584] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[        KERNEL] [    1.966588] ohci-pci: OHCI PCI platform driver
[        KERNEL] [    1.966664] uhci_hcd: USB Universal Host Controller Interface driver
[        KERNEL] [    1.967080] uhci_hcd 0000:00:10.0: UHCI Host Controller
[        KERNEL] [    1.967101] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[        KERNEL] [    1.967148] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000f900
[        KERNEL] [    1.967310] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[        KERNEL] [    1.967315] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[        KERNEL] [    1.967319] usb usb2: Product: UHCI Host Controller
[        KERNEL] [    1.967324] usb usb2: Manufacturer: Linux 4.19.175 uhci_hcd
[        KERNEL] [    1.967328] usb usb2: SerialNumber: 0000:00:10.0
[        KERNEL] [    1.967806] hub 2-0:1.0: USB hub found
[        KERNEL] [    1.967823] hub 2-0:1.0: 2 ports detected
[        KERNEL] [    1.968566] uhci_hcd 0000:00:10.1: UHCI Host Controller
[        KERNEL] [    1.968587] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[        KERNEL] [    1.968631] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000f800
[        KERNEL] [    1.968786] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[        KERNEL] [    1.968791] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[        KERNEL] [    1.968796] usb usb3: Product: UHCI Host Controller
[        KERNEL] [    1.968801] usb usb3: Manufacturer: Linux 4.19.175 uhci_hcd
[        KERNEL] [    1.968805] usb usb3: SerialNumber: 0000:00:10.1
[        KERNEL] [    1.973038] hub 3-0:1.0: USB hub found
[        KERNEL] [    1.973075] hub 3-0:1.0: 2 ports detected
[        KERNEL] [    1.981632] uhci_hcd 0000:00:10.2: UHCI Host Controller
[        KERNEL] [    1.981664] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[        KERNEL] [    1.981716] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f700
[        KERNEL] [    1.981879] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[        KERNEL] [    1.981884] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[        KERNEL] [    1.981889] usb usb4: Product: UHCI Host Controller
[        KERNEL] [    1.981893] usb usb4: Manufacturer: Linux 4.19.175 uhci_hcd
[        KERNEL] [    1.981897] usb usb4: SerialNumber: 0000:00:10.2
[        KERNEL] [    1.982393] hub 4-0:1.0: USB hub found
[        KERNEL] [    1.982414] hub 4-0:1.0: 2 ports detected
[        KERNEL] [    1.983144] uhci_hcd 0000:00:10.3: UHCI Host Controller
[        KERNEL] [    1.983164] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[        KERNEL] [    1.983210] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000f600
[        KERNEL] [    1.983368] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[        KERNEL] [    1.983373] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[        KERNEL] [    1.983378] usb usb5: Product: UHCI Host Controller
[        KERNEL] [    1.983382] usb usb5: Manufacturer: Linux 4.19.175 uhci_hcd
[        KERNEL] [    1.983386] usb usb5: SerialNumber: 0000:00:10.3
[        KERNEL] [    1.983861] hub 5-0:1.0: USB hub found
[        KERNEL] [    1.983880] hub 5-0:1.0: 2 ports detected
[        KERNEL] [    1.984707] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[        KERNEL] [    1.997402] serio: i8042 KBD port at 0x60,0x64 irq 1
[        KERNEL] [    1.997632] serio: i8042 AUX port at 0x60,0x64 irq 12
[        KERNEL] [    1.997844] hv_vmbus: registering driver hyperv_keyboard
[        KERNEL] [    1.998038] mousedev: PS/2 mouse device common for all mice
[        KERNEL] [    1.998844] usbcore: registered new interface driver synaptics_usb
[        KERNEL] [    1.999097] usbcore: registered new interface driver usbtouchscreen
[        KERNEL] [    1.999319] input: PC Speaker as /devices/platform/pcspkr/input/input4
[        KERNEL] [    2.000246] rtc_cmos 00:03: RTC can wake from S4
[        KERNEL] [    2.000665] rtc_cmos 00:03: registered as rtc0
[        KERNEL] [    2.000766] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
[        KERNEL] [    2.020697] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[        KERNEL] [    2.027608] cpufreq_nforce2: No nForce2 chipset
[        KERNEL] [    2.027759] hidraw: raw HID events driver (C) Jiri Kosina
[        KERNEL] [    2.028200] hv_vmbus: registering driver hid_hyperv
[        KERNEL] [    2.029245] usbcore: registered new interface driver usbhid
[        KERNEL] [    2.029249] usbhid: USB HID core driver
[        KERNEL] [    2.029590] NET: Registered protocol family 17
[        KERNEL] [    2.029611] mce: Unable to init MCE device (rc: -5)
[        KERNEL] [    2.029677] mce: Using 0 MCE banks
[        KERNEL] [    2.029688] Using IPI No-Shortcut mode
[        KERNEL] [    2.029700] sched_clock: Marking stable (2031490972, -2523505)->(2029010579, -43112)
[        KERNEL] [    2.054355] Loading compiled-in X.509 certificates
[        KERNEL] [    2.054791] rtc_cmos 00:03: setting system clock to 2021-04-07 10:59:12 UTC (1617793152)
[        KERNEL] [    2.061561] Freeing unused kernel image memory: 3512K
[        KERNEL] [    2.069396] Write protecting the kernel text: 4352k
[        KERNEL] [    2.069474] Write protecting the kernel read-only data: 1336k
[        KERNEL] [    2.069478] Run /init as init process
[          pfac] [    2.382923] Run /sbin/initrd.
[          pfac] [    2.383027] Ok, PID 745.
[        initrd] [    2.385293] WTware 6.0.36 shell.
[        initrd] [    2.386725] HDD/MMC/SD boot.
[        initrd] [    2.388319] Load VFAT filesystem driver.
[        initrd] [    2.388458] modprobe fat.
[        initrd] [    2.394612] modprobe vfat.
[        initrd] [    2.402136] Load IDE bus driver.
[        initrd] [    2.402256] modprobe libata.
[        KERNEL] [    2.408732] SCSI subsystem initialized
[        KERNEL] [    2.416853] libata version 3.00 loaded.
[        initrd] [    2.424762] modprobe ahci.
[        initrd] [    2.437203] ATA module ahci.ko loaded.
[        initrd] [    2.437315] modprobe pata_via.
[        KERNEL] [    2.442773] pata_via 0000:00:0f.1: version 0.3.4
[        KERNEL] [    2.443314] PCI Interrupt Link [ALKA] enabled at IRQ 20
[        KERNEL] [    2.452180] scsi host0: pata_via
[        KERNEL] [    2.453214] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[        KERNEL] [    2.455110] scsi host1: pata_via
[        KERNEL] [    2.455296] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[        KERNEL] [    2.455301] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[        KERNEL] [    2.543492] psmouse serio1: Failed to deactivate mouse on isa0060/serio1: -5
[        KERNEL] [    2.572350] psmouse serio1: Failed to enable mouse on isa0060/serio1
[        KERNEL] [    2.650679] usb 3-1: New USB device found, idVendor=192f, idProduct=0916, bcdDevice= 2.00
[        KERNEL] [    2.650687] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[        KERNEL] [    2.650692] usb 3-1: Product: USB Optical Mouse
[        KERNEL] [    2.670427] input: USB Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/0003:192F:0916.0001/input/input7
[        KERNEL] [    2.670863] hid-generic 0003:192F:0916.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:10.1-1/input0
[        initrd] [    2.795796] ATA module pata_via.ko loaded.
[        initrd] [    2.795909] modprobe sata_via.
[        KERNEL] [    2.798794] sata_via 0000:00:0f.0: version 2.6
[        KERNEL] [    2.799184] sata_via 0000:00:0f.0: routed to hard irq line 11
[        KERNEL] [    2.806300] scsi host2: sata_via
[        KERNEL] [    2.808139] scsi host3: sata_via
[        KERNEL] [    2.808323] ata3: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 20
[        KERNEL] [    2.808328] ata4: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 20
[        KERNEL] [    2.835263] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input6
[        KERNEL] [    2.837205] tsc: Refined TSC clocksource calibration: 1496.249 MHz
[        KERNEL] [    2.837223] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x15914b41034, max_idle_ns: 440795241919 ns
[        KERNEL] [    2.837263] clocksource: Switched to clocksource tsc
[        KERNEL] [    2.849526] psmouse serio1: Failed to enable mouse on isa0060/serio1
[        KERNEL] [    3.012969] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[        KERNEL] [    3.175512] ata3.00: HPA detected: current 312579695, native 312581808
[        KERNEL] [    3.175524] ata3.00: ATA-8: TOSHIBA MK1665GSX, GJ003A, max UDMA/100
[        KERNEL] [    3.175529] ata3.00: 312579695 sectors, multi 1: LBA48 NCQ (depth 0/32)
[        KERNEL] [    3.178396] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK1665GS 3A   PQ: 0 ANSI: 5
[        KERNEL] [    3.384984] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[        initrd] [    3.400167] ATA module sata_via.ko loaded.
[        initrd] [    3.400277] modprobe pata_legacy all=1.
[        KERNEL] [    3.403224] PDC20230-C/20630 VLB ATA controller detected.
[        SYSLOG] [    3.406872] <29>Apr  7 10:59:13 modprobe: FATAL: Error inserting pata_legacy (/lib/modules/4.19.175/kernel/drivers/ata/pata_legacy.ko): No such device

[        initrd] [    3.407622] modprobe mmc_block.
[        initrd] [    3.421788] modprobe sdhci-pci.
[        KERNEL] [    3.428471] sdhci: Secure Digital Host Controller Interface driver
[        KERNEL] [    3.428478] sdhci: Copyright(c) Pierre Ossman
[        initrd] [    3.435698] modprobe sdhci-acpi.
[        initrd] [    3.444308] modprobe rtsx_pci_sdmmc.
[        initrd] [    3.453751] Load HDD drivers.
[        initrd] [    3.453872] modprobe sd_mod.
[        KERNEL] [    3.460089] sd 2:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[        KERNEL] [    3.460120] sd 2:0:0:0: [sda] Write Protect is off
[        KERNEL] [    3.460126] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[        KERNEL] [    3.460164] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[        KERNEL] [    3.497571]  sda: sda1 sda2
[        KERNEL] [    3.498422] sd 2:0:0:0: [sda] Attached SCSI disk
[        initrd] [    3.509563] Success: media /dev/sda1 mounted to /bootmedia.
/--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
| [BOM]
| clientIP=*
| config=local
| netmedia=ethernet
| setupPassword=e5949da1f7fef6dff16bc53bedf6a0e3
\----------------------------------------------------
[        initrd] [    3.522653] Do not cache package files.
[        initrd] [    3.522835] WTpassword present: e5949da1f7fef6dff16bc53bedf6a0e3.
[        initrd] [    3.523025] Unpack /bootmedia/packages/lib6.
[        KERNEL] [    3.591325] random: fast init done
[        initrd] [    4.978681] PCI: C 06 1106:2314 Bridge VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge.
[        initrd] [    4.978832] PCI: C 01:01 1106:3149 Mass storage controller IDE interface VIA Technologies, Inc. VIA VT6420 SATA RAID Controller.
[        initrd] [    4.978908] PCI: C 06 1106:0314 Bridge VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge.
[        initrd] [    4.978982] PCI: C 0c:03 1106:3038 Serial bus controller USB controller VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller.
[        initrd] [    4.979071] PCI: C 06 1106:7314 Bridge VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge.
[        initrd] [    4.979142] PCI: C 06 1106:3208 Bridge VIA Technologies, Inc. PT890 Host Bridge.
[        initrd] [    4.979213] PCI: C 06:01 1106:3227 Bridge ISA bridge VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South].
[        initrd] [    4.979283] PCI: C 01:01 1106:0571 Mass storage controller IDE interface VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE.
[        initrd] [    4.979352] PCI: C 06 1106:1314 Bridge VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge.
[        initrd] [    4.979422] PCI: C 0c:03 1106:3104 Serial bus controller USB controller VIA Technologies, Inc. USB 2.0.
[        initrd] [    4.979541] PCI: C 02 10ec:8139 Network controller Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter.
[        initrd] [    4.979622] PCI: C 04:01 1106:3059 Multimedia controller Multimedia audio controller VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller.
[        initrd] [    4.979693] PCI: C 06:04 1106:b198 Bridge PCI bridge VIA Technologies, Inc. VT8237/VX700 PCI Bridge.
[        initrd] [    4.979762] PCI: C 06 1106:4314 Bridge VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge.
[        initrd] [    4.979832] PCI: C 03 1106:3344 Display controller VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro].
[        initrd] [    5.036205] USB: 192f:0916 Avago Technologies, Pte. ADNS-2710 Optical Mouse Controller.
[        initrd] [   10.031174] Start Setup.
[        KERNEL] [  293.432854] random: crng init done
[        initrd] [12213.113380] Load Ethernet drivers.
[        initrd] [12213.120352] modprobe 8139cp.
[        initrd] [12213.127612] NIC module 8139cp.ko loaded.
[        KERNEL] [12213.124201] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[        KERNEL] [12213.124219] 8139cp 0000:00:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[        initrd] [12213.127801] modprobe 8139too.
[        initrd] [12213.143629] NIC module 8139too.ko loaded.
[        KERNEL] [12213.137469] 8139too: 8139too Fast Ethernet driver 0.9.28
[        KERNEL] [12213.138687] 8139too 0000:00:08.0 eth0: RealTek RTL8139 at 0xe5e1b7e9, 00:19:17:20:9a:be, IRQ 17
[        initrd] [12213.174194] eth0: 10ec:8139. Apply WOL configuration.
[        KERNEL] [12213.169998] 8139too 0000:00:08.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[        initrd] [12213.174337] WTpassword present: e5949da1f7fef6dff16bc53bedf6a0e3.
[        initrd] [12213.700854] dhcp: 374 bytes from 192.168.0.1.
[        initrd] [12213.700989] 00000000:000001620000000000110000C0A80001C0A80002004300440162000002010600  ...b................C.D.b......
[        initrd] [12213.701061] 00000020:67458B6B0000000000000000C0A80002C0A8000100000000001917209ABE0000  gE.k..................... ....
[        initrd] [12213.701129] 00000040:0000000000000000000000000000000000000000000000000000000000000000  ................................
[        initrd] [12213.701197] 00000060:0000000000000000000000000000000000000000000000000000000000000000  ................................
[        initrd] [12213.701265] 00000080:00000000000000007774776172652E7078650000000000000000000000000000  ........wtware.pxe..............
[        initrd] [12213.701333] 000000a0:0000000000000000000000000000000000000000000000000000000000000000  ................................
[        initrd] [12213.701400] 000000c0:0000000000000000000000000000000000000000000000000000000000000000  ................................
[        initrd] [12213.701468] 000000e0:0000000000000000000000000000000000000000000000000000000000000000  ................................
[        initrd] [12213.701537] 00000100:0000000000000000638253633501023604C0A800013304000002580104FFFFFF  ........c.Sc5..6.....3....X.....
[        initrd] [12213.701604] 00000120:000304C0A800010604C0A80001420C3139322E3136382E302E33374338433A5C  .............B.192.168.0.37C8C:\
[        initrd] [12214.705259] dhcp: 374 bytes from 192.168.0.1.
[        initrd] [12214.705395] 00000000:000001620000000000110000C0A80001C0A80002004300440162000002010600  ...b................C.D.b......
[        initrd] [12214.705467] 00000020:67458B6B0000000000000000C0A80002C0A8000100000000001917209ABE0000  gE.k..................... ....
[        initrd] [12214.705534] 00000040:0000000000000000000000000000000000000000000000000000000000000000  ................................
[        initrd] [12214.705601] 00000060:0000000000000000000000000000000000000000000000000000000000000000  ................................
[        initrd] [12214.705669] 00000080:00000000000000007774776172652E7078650000000000000000000000000000  ........wtware.pxe..............
[        initrd] [12214.705739] 000000a0:0000000000000000000000000000000000000000000000000000000000000000  ................................
[        initrd] [12214.705807] 000000c0:0000000000000000000000000000000000000000000000000000000000000000  ................................
[        initrd] [12214.705872] 000000e0:0000000000000000000000000000000000000000000000000000000000000000  ................................
[        initrd] [12214.705939] 00000100:0000000000000000638253633501053604C0A800013304000002580104FFFFFF  ........c.Sc5..6.....3....X.....
[        initrd] [12214.706007] 00000120:000304C0A800010604C0A80001420C3139322E3136382E302E33374338433A5C  .............B.192.168.0.37C8C:\
[        initrd] [12214.706095] [DHCP] DHCP server address 192.168.0.1.
[        initrd] [12214.706163] [DHCP] IP 192.168.0.2 mask 255.255.255.0.
[        initrd] [12214.706227] [DHCP] Default gateway 192.168.0.1.
[        initrd] [12214.706289] [DHCP] DNS 192.168.0.1.
[        initrd] [12214.706358] [DHCP] TFTP from 066 192.168.0.37.
[        initrd] [12214.706422] [DHCP] TFTP 192.168.0.37.
[        initrd] [12214.706482] [DHCP] Boot file (067) C:\Program Files (x86)\WTware\TFTPDROOT\6.0.36wtware.pxe.
[        initrd] [12214.706546] [DHCP] TFTP binary "C:\Program Files (x86)\WTware\T", configs prefix "C:\Program Files (x86)\", using "\" slash.
WTC listener is active.
WTC broadcast listener is active.
Send broadcast WTCU discover.
[        initrd] [12214.708901] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[          pfac] [12214.709322] Run /sbin/httpd.
[          pfac] [12214.709410] Ok, PID 877.
[        initrd] [12214.709634] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc.
[        initrd] [12214.710117] /bootmedia/configs/config.wtc -> /tmp/config.wtc, 66 bytes copied.
[        initrd] [12214.710230] Common local disk config:
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| server=192.168.0.37
| connection
\----------------------------------------------------
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=192.168.0.37
| connection 
\----------------------------------------------------
[        initrd] [12214.711096] Hostname: "wtw001917209ABE".
[        initrd] [12214.714788] [NTP] 42 DHCP option is not set.
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
[         httpd] [12214.726613] Internal HTTP Server, WTware 6.0.36
[        initrd] [12214.733876] Use 'video=VESA(F)' driver.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=192.168.0.37
| video=VESA(F)
| connection 
\----------------------------------------------------
[        initrd] [12214.734286] Unpack /bootmedia/packages/f.
[         httpd] [12214.734699] Reread settings.
[         httpd] [12214.735258] Everyone can control terminal by HTTP.
[        initrd] [12215.365946] Unpack /bootmedia/packages/fwt6.
[        initrd] [12215.842183] Unpack /bootmedia/packages/graphic.
[            gm] [12215.909621] WTware 6.0.36 session manager.
[            gm] [12215.910843] EV_REL flag found. Add event6: PS/2 Generic Mouse.
[            gm] [12215.967569] EV_REL flag found. Add event5: USB Optical Mouse.
[            gm] [12215.967802] Keys found. Add event4: AT Translated Set 2 keyboard.
[            gm] [12215.967935] Ignore event3: PC Speaker.
[            gm] [12215.968054] Keys found. Add event2: Power Button.
[            gm] [12215.968178] Keys found. Add event1: Sleep Button.
[            gm] [12215.968303] Keys found. Add event0: Power Button.
[            gm] [12215.968549] Display mode: 1024x768, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0.
[            gm] [12216.989345] VBE Version 3.0.
[            gm] [12216.989491] VBE modelist at 0x000c3b76.
[            gm] [12216.989653] Mode 257: 640x480 (256 color palette) linelength 640 bits 8.
[            gm] [12216.989807] Mode 273: 640x480 (5:6:5) linelength 1280 bits 16.
[            gm] [12216.989959] Mode 274: 640x480 (8:8:8) linelength 2560 bits 32.
[            gm] [12216.990113] Mode 369: 720x480 (256 color palette) linelength 720 bits 8.
[            gm] [12216.990276] Mode 371: 720x480 (5:6:5) linelength 1440 bits 16.
[            gm] [12216.990440] Mode 373: 720x480 (8:8:8) linelength 2880 bits 32.
[            gm] [12216.990608] Mode 441: 720x540 (256 color palette) linelength 720 bits 8.
[            gm] [12216.990777] Mode 442: 720x540 (5:6:5) linelength 1440 bits 16.
[            gm] [12216.990949] Mode 443: 720x540 (8:8:8) linelength 2880 bits 32.
[            gm] [12216.991126] Mode 380: 720x576 (256 color palette) linelength 720 bits 8.
[            gm] [12216.991309] Mode 382: 720x576 (5:6:5) linelength 1440 bits 16.
[            gm] [12216.991550] Mode 383: 720x576 (8:8:8) linelength 2880 bits 32.
[            gm] [12216.991748] Mode 259: 800x600 (256 color palette) linelength 800 bits 8.
[            gm] [12216.991940] Mode 276: 800x600 (5:6:5) linelength 1600 bits 16.
[            gm] [12216.992135] Mode 277: 800x600 (8:8:8) linelength 3200 bits 32.
[            gm] [12216.992332] Mode 261: 1024x768 (256 color palette) linelength 1024 bits 8.
[            gm] [12216.992534] Mode 279: 1024x768 (5:6:5) linelength 2048 bits 16.
[            gm] [12216.992740] Mode 280: 1024x768 (8:8:8) linelength 4096 bits 32.
[            gm] [12216.992816] Use mode 280.
[            gm] [12216.993027] Mode 293: 1280x720 (256 color palette) linelength 1280 bits 8.
[            gm] [12216.993245] Mode 294: 1280x720 (5:6:5) linelength 2560 bits 16.
[            gm] [12216.993469] Mode 295: 1280x720 (8:8:8) linelength 5120 bits 32.
[            gm] [12216.993700] Mode 377: 1280x768 (256 color palette) linelength 1280 bits 8.
[            gm] [12216.993934] Mode 378: 1280x768 (5:6:5) linelength 2560 bits 16.
[            gm] [12216.994167] Mode 379: 1280x768 (8:8:8) linelength 5120 bits 32.
[            gm] [12216.994406] Mode 438: 1280x800 (256 color palette) linelength 1280 bits 8.
[            gm] [12216.994651] Mode 439: 1280x800 (5:6:5) linelength 2560 bits 16.
[            gm] [12216.994898] Mode 440: 1280x800 (8:8:8) linelength 5120 bits 32.
[            gm] [12216.995149] Mode 263: 1280x1024 (256 color palette) linelength 1280 bits 8.
[            gm] [12216.995405] Mode 282: 1280x1024 (5:6:5) linelength 2560 bits 16.
[            gm] [12216.995693] Mode 283: 1280x1024 (8:8:8) linelength 5120 bits 32.
[            gm] [12216.995967] Mode 315: 1400x1050 (256 color palette) linelength 1408 bits 8.
[            gm] [12216.996236] Mode 316: 1400x1050 (5:6:5) linelength 2816 bits 16.
[            gm] [12216.996507] Mode 318: 1400x1050 (8:8:8) linelength 5600 bits 32.
[            gm] [12216.996783] Mode 529: 1440x900 (256 color palette) linelength 1440 bits 8.
[            gm] [12216.997064] Mode 530: 1440x900 (5:6:5) linelength 2880 bits 16.
[            gm] [12216.997345] Mode 531: 1440x900 (8:8:8) linelength 5760 bits 32.
[            gm] [12216.997624] Mode 288: 1600x1200 (256 color palette) linelength 1600 bits 8.
[            gm] [12216.997912] Mode 290: 1600x1200 (5:6:5) linelength 3200 bits 16.
[            gm] [12216.998202] Mode 292: 1600x1200 (8:8:8) linelength 6400 bits 32.
[            gm] [12216.998511] Mode 358: 1920x1080 (256 color palette) linelength 1920 bits 8.
[            gm] [12216.998843] Mode 359: 1920x1080 (5:6:5) linelength 3840 bits 16.
[            gm] [12216.999163] Mode 360: 1920x1080 (8:8:8) linelength 7680 bits 32.
[            gm] [12217.136719] Linear framebuffer.
[            gm] [12217.137299] mmap () return 0xb7578000. Touch video memory.
[            gm] [12217.137381] Ok.
[            gm] [12217.142612] Use /lib/ui32.so.
[            gm] [12217.242629] WMEMCOPY: 28800K copied in 0.087155 sec.
[            gm] [12217.322864] libc: 28800K copied in 0.079958 sec.
[            gm] [12217.407633] movs: 28800K copied in 0.084470 sec.
[            gm] [12217.479341] MMX: 28800K copied in 0.071435 sec.
[            gm] [12217.551753] SSE2: 28800K copied in 0.072152 sec.
[            gm] [12217.551903] Choose MMX memcpy.
[            gm] [12217.576960] Run '/sbin/resolver 0x12f1d40 dns [192.168.0.37]', log '', env '', pid ''.
[          pfac] [12217.577458] Run /sbin/resolver 0x12f1d40 dns [192.168.0.37].
[          pfac] [12217.577556] Ok, PID 878.
[            gm] [12217.577726] Nobody can control terminal by VNC.
[            gm] [12217.577818] Nobody can control terminal by WTRC.
[          pfac] [12217.584961] Process pid 878 terminated, status 00000000.
[            gm] [12217.588807] 192.168.0.37 => 192.168.0.37.
[            gm] [12217.594929] Free ram before fork terminal client /sbin/rdpclient-SSE (session 1): 986636 Kb.
[            gm] [12217.595077] Run '/sbin/rdpclient-SSE 1', log '/tmp/rdpclient.out', env '', pid ''.
[          pfac] [12217.595550] Run /sbin/rdpclient-SSE 1.
[          pfac] [12217.595652] Ok, PID 879.
[ rdpclient 879] [12217.606059] RDP Terminal Client, WTware 6.0.36, pipe 1, pid 879.
[ rdpclient 879] [12217.611847] Use /lib/ui32-SSE.so.
[ rdpclient 879] [12217.613007] Make RDP session with 192.168.0.37, port 3389.
[ rdpclient 879] [12217.613146]  No username.
[ rdpclient 879] [12217.613221]  No password.
[ rdpclient 879] [12217.613290]  No PIN.
[ rdpclient 879] [12217.613358]  No domain.
[ rdpclient 879] [12217.613428]  No shell.
[ rdpclient 879] [12217.613501]  No directory.
[ rdpclient 879] [12217.613576]  Window: 960x768@24.
[ rdpclient 879] [12217.613650]  PFlags 0x0000002F.
[ rdpclient 879] [12217.613724]  Keyboard 00000409:00000000.
[ rdpclient 879] [12217.613797]  My hostname "wtw001917209ABE".
[ rdpclient 879] [12217.613872] TCP: connecting to 192.168.0.37:3389.
[ rdpclient 879] [12217.614769] TCP: connection with 192.168.0.37:3389 established.
[ rdpclient 879] [12217.614912] Turn keepalive on.
[ rdpclient 879] [12217.616264] Free ram after buffers allocation: 985912 KB.
[ rdpclient 879] [12225.486633] Reconnect with NLA enabled.
[ rdpclient 879] [12225.486828] TCP: reconnecting to 192.168.0.37:3389.
[ rdpclient 879] [12225.487064] TCP: connection with 192.168.0.37:3389 established.
[ rdpclient 879] [12225.487131] Turn keepalive on.
[ rdpclient 879] [12225.495645] Server supports GFX Pipeline.
[ rdpclient 879] [12225.495775] NLA.
[ rdpclient 879] [12225.495822] SSL/TLS.
[ rdpclient 879] [12225.519045] Enable font smoothing and Desktop Composition.
[ rdpclient 879] [12225.521633] RDP5 encryption (X.509).
[ rdpclient 879] [12225.595533] GFX codec.
[ rdpclient 879] [12225.616113] Graphics output buffer 960x768, 1 monitors.
[ rdpclient 879] [12225.616291] Monitor 0: 0.0-959.767 primary.
[ rdpclient 879] [12225.954120] errorInfo 0x00000000.
[ rdpclient 879] [12226.126380] Run 1 tile threads.
[ rdpclient 879] [12226.384771] SessionId 0x00000007: SERVER\test.